Nozzle: 210 – 220 °C
Printbed: 60 °C
Speed: 30 – 80 mm/s
Fan: On
Ultrafuse® PLA (previously Innofil3D PLA, different name, same high-quality product!) is Poly-Lactic-Acid, a biodegradable polymer with a low melting point.
It is an easy material to print with and Ultrafuse PLA gives a smooth printing result.
This most used 3D printing material is available in a wide range of RAL colors and translucent variants.
When properly cooled, PLA has a higher maximum printing speed, lower layer heights, and sharper printed corners.
Combining this with low warping of the print makes it a popular plastic for makers, prosumers and schools.
Tips & tricks
Curious about our settings with Ultrafuse PLA?
We are printing with the following settings;
- Print temperature 210-220 degrees
- Heated bed at 60 degrees
- Print speed at 30-80 mm/s
