 Nozzle: 240 – 265 °C
 Printbed: 70 – 100 °C
 Speed: Medium
Fan: Off
TitanX is a high-end engineering filament with ABS (acrylonitrile butadiene styrene) as the main component. The formulation of TitanX is enhanced with added polymers, binding agents and impact modifiers resulting in an engineering filament that combines exceptional mechanical properties with optimized interlayer adhesion and virtually no warping.
TitanX is used by industries worldwide for creating functional prototypes and end-use parts.
Key features
- Strongly improved mechanical properties
-
- >65% more impact resistant than regular ABS
- Minimal warping, excellent interlayer adhesion, and seamless build plate adhesion
- Precise 3D printing with remarkable fine detail
- Vicat softening temperature of 97ËšC
- Compatible with Helios Support for complex multi-extrusion 3D printing
- Nearly odorless processing and no unpleasant styrene smell when being 3D printed
Applications
- Functional prototyping
- End-use parts
- Fit testing
- Engineering parts
- Short-run manufacturing
General printing guidelines *
| Nozzle size: ≥ 0.15mm | Layer height: ≥ 0.1mm | Experience level: Beginner |
| Print temp: ± 240 – 265° C | Fan speed: 0-30% |  |
| Heat bed: ± 70 – 100° C | Enclosure needed: Recommended |
*)Â Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There is a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.
