Nozzle: 220 – 230 °C
Printbed: 25 – 60 °C
Speed: 20 – 40 mm/s
Fan: On
This Specialty family provides unique filaments from Polymaker to unlock new 3D printing applications.
PolySupport™ is a break away support for Polymaker PLA based filaments. It has a perfect interface with PLA, strong enough to support it and easily removable by hand.
Material Compatibility
++ support the model very well
+ generally support the model depending on its geometry
– generally doesn’t support the model depending on its geometry – – do not support the model
Material Adhesion with PolySupportTM |
|
| PLA based material from Polymaker’s portfolio | ++ |
| PETG based material from Polymaker’s portfolio | – |
| ABS based material from Polymaker’s portfolio | – |
| PC based material from Polymaker’s portfolio | + |
| PVB based material from Polymaker’s portfolio | + |
| TPU based material from Polymaker’s portfolio | + |
| Nylon based material from Polymaker’s portfolio | — |
| Nozzle temperature | 220 – 230 ( ̊C) |
| Build Surface material | BuildTak®, Blue Tape |
| Build surface treatment | None |
| Build plate temperature | 25 – 60 ( ̊C) |
| Cooling fan | Turned on |
| Printing speed | 20-40 (mm/s) |
| Raft separation distance | 0 (mm) |
| Retraction distance | 1 (mm) |
| Retraction speed | 20 (mm/s) |
| Recommended environmental temperature | Room temperature |
Based on 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may vary with different nozzle diameters
