Nozzle: 250 – 270 °C
Printbed: 90 – 105 °C
Speed: 30 – 50 mm/s
Fan: Off
PolyMax™ is a family of advanced 3D printing filaments produced with Polymaker’s Nano-reinforcement technology, to deliver exceptional mechanical properties and printing quality.
PolyMax™ PC is an engineered PC filament combining excellent strength, toughness, heat resistance and printing quality. It is the ideal choice for a wide range of engineering applications.
PolyMax™ PC features Polymaker’s Nano-reinforcement technology:
Nano-reinforcement technology is applied to produce filaments with excellent mechanical properties and printing quality. It dramatically improves the toughness of the material by increasing its impact resistance.

Nozzle temperature | 250 – 270 ( ̊C) |
Build Surface material | BuildTak®, Glass, PEI |
Build surface treatment | Magigoo PC |
Build plate temperature | 90 – 105 ( ̊C) |
Cooling fan | Turned off |
Printing speed | 30- 50 (mm/s) |
Raft separation distance | 0.2 (mm) |
Retraction distance | 1 (mm) |
Retraction speed | 20 (mm/s) |
Recommended environmental temperature | 70 – 80 (recommended) ( ̊C) |
Threshold overhang angle | 50 ( ̊) |
Recommended support material | PolySupportTM |
Based on 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may vary with different nozzle diameters
When printing with PolyMaxTM PC it is recommended to use an enclosure. For large part it is recommended to use a heated chamber.
It is recommended to anneal the printed part right after the printing process to release the residual internal stress. Annealing settings: 100 ̊C for 2h