Nozzle: 250 – 270 °C
Printbed: 90 – 105 °C
Speed: 30 – 50 mm/s
Fan: Off
Nozzle temperature 250 – 270 ( ̊C)
Build Surface material BuildTak®, Glass, PEI
Build surface treatment Magigoo PC
Build plate temperature 90 – 105 ( ̊C)
Cooling fan Turned off
Printing speed 30- 50 (mm/s)
Raft separation distance 0.2 (mm)
Retraction distance 1 (mm)
Retraction speed 20 (mm/s)
Recommended environmental temperature 70 – 80 (recommended) ( ̊C)
Threshold overhang angle 50 ( ̊)
Recommended support material PolySupportTM
Based on 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may vary with different nozzle diameters
When printing with PolyMaxTM PC it is recommended to use an enclosure. For large part it is recommended to use a heated chamber.
It is recommended to anneal the printed part right after the printing process to release the residual internal stress. Annealing settings: 100 ̊C for 2h
