Nozzle: 360 – 400 °C
Printbed: ≥ 120 °C
Fan: 0 – 25%
FormFutura PEI ULTEM 1010 is an amorphous ultra-performance PEI (Polyether Imide) 3D printer filament using ULTEM 1010 resin. PEI ULTEM 1010 combines excellent thermal propterties, exceptional dimensional stability, inherent flame retardancy and good chemical resistance into a high performance 3D printing filament. PEI ULTEM 1010 has a glass transition temperature of 217°C and parts that are 3D printed with PEI ULTEM 1010 filament are suitable for use in applications that will be exposed to continuous service temperatures up to 170°C.
FormFutura PEI ULTEM 1010 is a flame retardant 3D printing filament with low smoke evolution and meets UL 94 V-0 and 5VA ratings. PEI ULTEM 1010 filament enables one to 3D print parts with excellent layer bonding resulting in superb dimensional accuracy, impact resistance, durablitity and tensile strength properties for 3D printed parts.
- Glass transition temperature of 217°C
- Suitable for applications with a continuous service temperature of 170°C
- Excellent dimensional stability
- Long-term hydrolytic stability
- Excellent mechanical properties
- Flame retardant with UL 94 V-0 and 5VA ratings
- Exceptional chemical resistance properties
- Electrical applications
- Chemically-resistant parts
- Durable parts
- Aerospace applications
General printing guidelines *
|Nozzle size: ≥ 0.4mm||Layer height: ≥ 0.10mm||Experience level: Expert|
|Print temp: ± 360 – 400° C||Fan speed: 0 – 25%||Drying: +4 hours at max.110°C|
|Heat bed: ≥ 120° C||Enclosure needed: 90°C heated chamber
||Adhesion: EasyFix Nr. VII|
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these parameters if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.
|ρ: 1.27 g/cc||0.2 Kg spool||0.5 Kg spool|
|Ø 1.75mm||± 65m||± 164m|
|Ø 2.85mm||± 25m||± 62m|
Product export information
|HS Code: 39169090||Description: Monofilament||Country of origin: the Netherlands|
This filament is compliant to below-listed directives and regulations.
- RoHS directive 2011/65/EC
- REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.