- Max Input current: 0.7 A per phase
- Step angle: 1.8 deg.
- Torque: 18 N/cm
- Output shaft diameter: 5.0 mm
- Hole for mounting: 31 mm, 4x M3
- Motor length: 25 mm
- Weight: 153 g
Nema17 Pancake stepper 25mm
€16.23
Nema17 Pancake stepper 25mm
Nema17 High resolution 1.8 degree pancake stepper motor.
Delivers with a 300 mm JST-XH6 cable stripped without a second connector.
For common ratings, specifications and dimensions please see below or in the datasheet.
Available on backorder
Related products
Bondtech Coated Nozzle M6×1×5×13 1.75
This nozzle is manufactured by Bondtech in-house,
and will fit the following 3D printers:
- bq Hephestos
- Hephestos 2
- bq Prusa i3 Hephestos
- bq Witbox
- bq Witbox 2
- Creality CR-10
- Creality CR-10-S4
- Creality CR-10-S5
- Creality CR-10S
- MakerBot Replicator
- MakerBot Replicator 2
- MakerBot Replicator 2X
- Creality Ender 2
- Creality Ender 3 Pro
- Creality CR-20 Pro
- Creality Ender 5
- Craftbot family
- Creality CR-10 V2
- Tevo Tornado
Features
- 1 unit per pack
- Available in sizes from 0.25 to 0.8mm
Mosquito 12V 50W heater
Mosquito 24V 50W heater
- Cartridge length: 22 mm;
- Cartridge diameter: sized to fit into a 6mm H7 tolerance hole.
- Extension cable is 1m in length
- Molex connectors
- Available in 12V or 24V variations
- 50W
Nema17 Pancake stepper 22mm
Nema17 Pancake stepper 22mm
Nema17 Pancake stepper with a 150 mm long not detachable stripped cable with connector.
Mosquito Groove Mount Adapter
Mosquito Groove Mount Adapter
Adapt the Mosquito and Mosquito Magnum hotends to Bondtech QR and BMG extruders using the groove mount standard.
BMG-M Extruder
The Bondtech BMG-M extruder combines high performance and resolution with low weight. Together with our proven and highly celebrated Dual-Drive technology you can expect problem free material feeding.
Designed for Mosquito
This extruder is optimized for the Mosquito / Mosquito Magnum hotends with and integrated torque lock system to make the interface very strong and makes nozzle changes a breeze.
Made with PA12 by SLS
The housing parts are professionally SLS printed in nylon for maximum strength and precision.
This extruder only supports 1.75 mm size filament.
QR Extruder
Dual Drive Gear Performance
The Bondtech QR Universal extruder gives you the markets highest performance, precision and reliability. Together with our proven and highly celebrated Dual-Drive technology you can expect problem free material feeding.
Universal Fit
The QR extruder is a universal solution which fits both bowden and direct driven applications. Available in both standard (right handed) and mirrored (left handed) orientation, for 3.00/2.85 and 1.75 mm filament.
3DSolex Matchless Everlast 1.75mm Nozzle
- Compatible with E3D V6, Prusa, Raise3D N2 and many more
Core Heating Technology
This nozzle will fit a large number of printers and hot-ends.
Drop-in compatibility to replace many other nozzles.Features
- Uses Core Heating technology to increase the melt zone
- Ruby tip to be abrasive resistant
- 1 unit per pack
- Available in sizes 0.4, 0.6 and 0.8 mm
Advantages
- Higher melt flow, up to 3 fold
- Use lower temperatures in your print profiles, or
- Work with thicker layers or/at higher speeds
- Machined with precision
- Hard tip to work with abrasive materials
Vanadium Nozzle
- Lifetime warranty against abrasion
- Wear resistant, plastic repellent coating
- Made of Vanadium HSS, hardened and tempered to 64 Rockwell C.
- Available in multiple orifice sizes
Bondtech Brass Nozzle M6×1×7.5×12.5 1.75
This nozzle is manufactured by Bondtech in-house,
and will fit the following hotends/blocks:
- Mosquito and Mosquito Magnum
- Copperhead
- E3D V4, V5 and V6 blocks
- E3D Chimera and Kraken
- RepRap M6
Features
- 1 unit per pack
- Available in sizes from 0.25 to 0.8mm
3DSolex Matchless 1.75mm nozzle
- Compatible with E3D V6, Prusa, Raise3D N2 and many more
Core Heating Technology
This nozzle will fit a large number of printers and hot-ends.
Drop-in compatibility to replace many other nozzles.Features
- Uses Core Heating technology to increase the melt zone
- 1 unit per pack
- Available in sizes from 0.25 to 2.0mm
Advantages
- Higher melt flow, up to 3 fold
- Use lower temperatures in your print profiles, or
- Work with thicker layers or/at higher speeds
- Machined with precision
Nema 17 Motor Slim Power 0.9 degree
Nema 17 Motor Slim Power 0.9 degree
Nema 17 High resolution 0.9 degree pancake stepper motor. Perfect fit for our BMG / Prusa extruder upgrades.
Delivers with 1000 mm long cable with Dupont 4-pin connector to a JST-PH6 6-pin connector.
For common ratings, specifications and dimensions please see below or in the datasheet.
BMG-X2 Extruder
BMG-X2 Extruder
The Bondtech BMG-X2 is the best and lightest performing extruder on the market that combines low weight with double high feeding capacity.
Two Versions Available
- for the older type of Chimera/Cyclops with a c-c of 18.00 mm (see pictures with Alu Mounts);
- for the newer Chimera+/Cyclops+ with a c-c of 20.00 mm (see pictures with red tabs).
The CC 20.00 version is compatible with the Aqua Version.
Make sure to select the correct version for your application.
This extruder only supports 1.75 mm size filament.