Pancake 22mm Stepper Motor 02 scaled 1
Pancake 22mm Stepper Motor 03 scaled 1
Pancake 22mm Stepper Motor 02 scaled 1
Pancake 22mm Stepper Motor 03 scaled 1

Nema17 Pancake stepper 22mm

Previous product
Nema 17 Motor Slim Power 0.9 degree €16.11
Next product
PLA+ PASTEL €23.99

€14.29

Highlights:
Nema17 Pancake stepper 22mm

Nema17 Pancake stepper with a 150 mm long not detachable stripped cable with connector.

Available on backorder

SKU: 13002 Categories: , , Tags: , ,
Description
  • Max Input current: 0.8 A
  • Step angle: 1.8 deg.
  • Torque: 12 Ncm
  • Output shaft diameter: 5.0 mm with flat.
  • Hole for mounting: 31 mm, 4xM3
  • Motor length: 22 mm
  • Weight: 129.5 g
Additional information
Bondtech

Accessories

Related Products

, ,

Mosquito Groove Mount Adapter

Highlights:

Mosquito Groove Mount Adapter

Adapt the Mosquito and Mosquito Magnum hotends to Bondtech QR and BMG extruders using the groove mount standard.

€13.95

Available on backorder

Add to cart
Quick View
, ,

3DSolex Hardcore Everlast Nozzle

Highlights:
  • Core Heating Technology

    This nozzle will ONLY fit the 3DSolex Hardcore.
    Hardcore fits in UM3, UM3 Extended, UM S3 and UM S5.

    Features
    • Uses Core Heating technology to increase the melt zone
    • Ruby tip to be abrasive resistant
    • 1 unit per pack
    • Available in sizes from 0.25 to 1.2mm
    Advantages
    • Higher melt flow, up to 3 fold
    • Use lower temperatures in your print profiles
    • Work with thicker layers or at higher speeds
    • Machined with precision
    • Hard tip to work with abrasive materials
€72.90

Available on backorder

Select options
Quick View
, ,

Bondtech Brass Nozzle M6×1×7.5×12.5 1.75

Highlights:

This nozzle is manufactured by Bondtech in-house,
and will fit the following hotends/blocks:

  • Mosquito and Mosquito Magnum
  • Copperhead
  • E3D V4, V5 and V6 blocks
  • E3D Chimera and Kraken
  • RepRap M6

Features

  • 1 unit per pack
  • Available in sizes from 0.25 to 0.8mm
€9.66

Available on backorder

Select options
Quick View
, , , ,

Mosquito 24V 50W heater

Highlights:

Mosquito 24V 50W heater

  • Cartridge length: 22 mm;
  • Cartridge diameter: sized to fit into a 6mm H7 tolerance hole.
  • Extension cable is 1m in length
  • Molex connectors
  • Available in 12V or 24V variations
  • 50W

€21.48

Available on backorder

Add to cart
Quick View
, ,

3DSolex Matchless Everlast 2.85mm Nozzle

Highlights:
  • Compatible with UM2+, UM2 Extended+, Olsson Block, E3D V6
    Core Heating Technology

    This nozzle will fit a large number of printers and hot-ends.
    Drop-in compatibility to replace many other nozzles.

    Features
    • Uses Core Heating technology to increase the melt zone
    • Ruby tip to be abrasive resistant
    • 1 unit per pack
    • Available in sizes from 0.25 to 1.2 mm
    Advantages
    • Higher melt flow, up to 3 fold
    • Use lower temperatures in your print profiles, or
    • Work with thicker layers or/at higher speeds
    • Machined with precision
    • Hard tip to work with abrasive materials
€72.90

Available on backorder

Select options
Quick View
, ,

Nema 17 Motor Slim Power 0.9 degree

Highlights:

Nema 17 Motor Slim Power 0.9 degree

Nema 17 High resolution 0.9 degree pancake stepper motor. Perfect fit for our BMG / Prusa extruder upgrades.

Delivers with 1000 mm long cable with Dupont 4-pin connector to a JST-PH6 6-pin connector.

For common ratings, specifications and dimensions please see below or in the datasheet.

€16.11

Available on backorder

Add to cart
Quick View
, , ,

3DSolex Hardcore PVA BB print core

Highlights:

Buy One, Replace Many

The 3DSolex Hardcore allows nozzle change. If the nozzle gets stuck or wasted, just replace the nozzle.

Main Features

  • It is fully compatible with standard Print Core BB
  • Nozzle can be changed
  • Compatible only with Hardcore nozzles from 3DSolex

Advantages

  • More freedom to set print profiles
  • Save money if you need just need new nozzle
€236.25

Available on backorder

Add to cart
Quick View
,

BMG-X2-M Extruder For Mosquito

Highlights:

The Bondtech BMG-X2 is the best and lightest performing extruder on the market that combines low weight with dual high feeding capacity.

Dedicated For Mosquito Hotends

This extruder is available in a single version, to use Mosquito hotends. The same version is also compatible with Mosquito Magnum.
Both have a C-C distance of 15mm.

€145.04

Available on backorder

Select options
Quick View
, ,

3DSolex Matchless 1.75mm nozzle

Highlights:
  • Compatible with E3D V6, Prusa, Raise3D N2 and many more

    Core Heating Technology

    This nozzle will fit a large number of printers and hot-ends.
    Drop-in compatibility to replace many other nozzles.

    Features

    • Uses Core Heating technology to increase the melt zone
    • 1 unit per pack
    • Available in sizes from 0.25 to 2.0mm

    Advantages

    • Higher melt flow, up to 3 fold
    • Use lower temperatures in your print profiles, or
    • Work with thicker layers or/at higher speeds
    • Machined with precision
€14.83

Available on backorder

Select options
Quick View
,

BMG Extruder

Highlights:

The Bondtech BMG extruder combines high performance and resolution with low weight. Together with our proven and highly celebrated Dual-Drive technology you can expect problem free material feeding.

The BMG works in both bowden and direct driven applications. Built in fitting for the E3D hotend and fits Nema17 stepper motors.

The housing parts are professionally SLS printed in nylon for maximum strength and precision.

This extruder only supports 1.75 mm size filament.

€85.95

Available on backorder

Select options
Quick View
, ,

Nema17 Geared stepper

Highlights:

Nema17 geared stepper with a planetary gear reducer.

Delivered with a 700 mm long JST-XH6 to PC2510 cable with quick-fit connectors.

For best performance it should be driven with 24V, please adjust your stepperdriver to output max 1.2A.

Additional cables also available, see to the right.

For common ratings, specifications and dimensions please see below or in the datasheet.

€37.28

Available on backorder

Add to cart
Quick View
,

BMG-X2 Extruder

Highlights:
BMG-X2 Extruder

The Bondtech BMG-X2 is the best and lightest performing extruder on the market that combines low weight with double high feeding capacity.

Two Versions Available
  • for the older type of Chimera/Cyclops with a c-c of 18.00 mm (see pictures with Alu Mounts);
  • for the newer Chimera+/Cyclops+ with a c-c of 20.00 mm (see pictures with red tabs).

The CC 20.00 version is compatible with the Aqua Version.
Make sure to select the correct version for your application.

This extruder only supports 1.75 mm size filament.

€145.04

Available on backorder

Select options
Quick View
Scroll To Top
Close
Close
Veikals
0 Grozs
Close

My Cart

Shopping cart is empty!

Continue Shopping