- Motor-type: NEMA17
- Weight: 406 g
- Max Input current: 1.2 A
- Step angle: 1.8 deg
- Gear ratio: 5.18:1
- Output shaft diameter: 8.0 mm
- Hole circle for mounting: 28 mm, 4x M3
- Motor length: 40 mm
Nema17 Geared stepper
€37.28
Nema17 geared stepper with a planetary gear reducer.
Delivered with a 700 mm long JST-XH6 to PC2510 cable with quick-fit connectors.
For best performance it should be driven with 24V, please adjust your stepperdriver to output max 1.2A.
Additional cables also available, see to the right.
For common ratings, specifications and dimensions please see below or in the datasheet.
Available on backorder
Related products
3DSolex Matchless 1.75mm nozzle
- Compatible with E3D V6, Prusa, Raise3D N2 and many more
Core Heating Technology
This nozzle will fit a large number of printers and hot-ends.
Drop-in compatibility to replace many other nozzles.Features
- Uses Core Heating technology to increase the melt zone
- 1 unit per pack
- Available in sizes from 0.25 to 2.0mm
Advantages
- Higher melt flow, up to 3 fold
- Use lower temperatures in your print profiles, or
- Work with thicker layers or/at higher speeds
- Machined with precision
Nema17 Pancake stepper 25mm
Nema17 Pancake stepper 25mm
Nema17 High resolution 1.8 degree pancake stepper motor.
Delivers with a 300 mm JST-XH6 cable stripped without a second connector.
For common ratings, specifications and dimensions please see below or in the datasheet.
BMG-X2 Extruder
BMG-X2 Extruder
The Bondtech BMG-X2 is the best and lightest performing extruder on the market that combines low weight with double high feeding capacity.
Two Versions Available
- for the older type of Chimera/Cyclops with a c-c of 18.00 mm (see pictures with Alu Mounts);
- for the newer Chimera+/Cyclops+ with a c-c of 20.00 mm (see pictures with red tabs).
The CC 20.00 version is compatible with the Aqua Version.
Make sure to select the correct version for your application.
This extruder only supports 1.75 mm size filament.
Mosquito Groove Mount Adapter
Mosquito Groove Mount Adapter
Adapt the Mosquito and Mosquito Magnum hotends to Bondtech QR and BMG extruders using the groove mount standard.
Mosquito 12V fan
Mosquito 12V fan
- High quality 25 mm box fan with Japanese bearings
- 3.64 CFM
- Genuine Molex Micro-Fit 3.0 connector
- Mounts directly to Mosquito or Mosquito Magnum hotend with included hardware
- Available in 12V or 24V configurations
- 1 m extension cable included.
3DSolex Matchless 2.85mm nozzle
-
Core Heating Technology
This nozzle will fit a large number of printers and hot-ends.
Drop-in compatibility to replace many other nozzles.Features
- Uses Core Heating technology to increase the melt zone
- Longer threading to increase heat transfer
- 1 unit per pack
- Available in sizes from 0.25 to 2.0mm
Advantages
- Higher melt flow, up to 3 fold
- Use lower temperatures in your print profiles, or
- Work with thicker layers or/at higher speeds
- Machined with precision
Bondtech Brass Nozzle M6×0.75×5×13 1.75
This nozzle is manufactured by Bondtech in-house,
and will fit the following 3D printers:
- Creality CR-10 Max
- Creality CR-10S Pro
- Creality CR-10S Pro V2
Features
- 1 unit per pack
- Available in sizes from 0.25 to 0.8mm
Mosquito Boron Nitride Paste
Mosquito Boron Nitride Paste
- Thermal paste for improving conduction
- Acts as a release agent
- Use the included applicator to coat the cartridge heater hole in your 3d printer heat block. Insert the cartridge heater while the paste is still wet, then let dry. The boron nitride boosts dissipation of heat from the hot section of the cartridge heater, improving its life.
- Retails in 5 cc syringes with luer lock fittings.
Mosquito 12V 50W heater
Mosquito 24V 50W heater
- Cartridge length: 22 mm;
- Cartridge diameter: sized to fit into a 6mm H7 tolerance hole.
- Extension cable is 1m in length
- Molex connectors
- Available in 12V or 24V variations
- 50W
V2 Extruder
The Bondtech Extruder Universal is based on our revolutionary new DualDrive technology that gives the best performance that are available today on the market.
The V2 designs is our first released product that allows for both a Bowden and a Direct-drive setup according to your choice. The unit is ready for Direct Drive use, for Bowden use you need the additional Bowden adapter.
Bondtech Coated Nozzle M6×1×7.5×12.5 1.75
This nozzle is manufactured by Bondtech in-house,
and will fit the following hotends/blocks:
- Mosquito and Mosquito Magnum
- Copperhead
- E3D V4, V5 and V6 blocks
- E3D Chimera and Kraken
- RepRap M6
Features
- 1 unit per pack
- Available in sizes from 0.25 to 0.8mm
Nema 17 Motor Slim Power 0.9 degree
Nema 17 Motor Slim Power 0.9 degree
Nema 17 High resolution 0.9 degree pancake stepper motor. Perfect fit for our BMG / Prusa extruder upgrades.
Delivers with 1000 mm long cable with Dupont 4-pin connector to a JST-PH6 6-pin connector.
For common ratings, specifications and dimensions please see below or in the datasheet.