13005
13005

Nema 17 Motor Slim Power 0.9 degree

Previous product
Nema17 Pancake stepper 25mm €16.23
Next product
Nema17 Pancake stepper 22mm €14.29

€16.11

Highlights:

Nema 17 Motor Slim Power 0.9 degree

Nema 17 High resolution 0.9 degree pancake stepper motor. Perfect fit for our BMG / Prusa extruder upgrades.

Delivers with 1000 mm long cable with Dupont 4-pin connector to a JST-PH6 6-pin connector.

For common ratings, specifications and dimensions please see below or in the datasheet.

Available on backorder

SKU: 13005 Categories: , , Tags: , ,
Description
NEMA 17 MOTOR SLIM POWER LDO-42STH25-1404MAC 0.9
  • Motor-type: NEMA 17
  • Step angle: 0.9°
  • Steps per revolution: 400
  • Max input current: 1.4 Amp
  • Torque: 18 N/cm
  • Output shaft length: 20 mm (5 mm diameter) (17 mm D-Shaped).
  • Hole for mounting: 31 mm, 4x M3
  • Motor length: 26 mm
  • Weight: 0.15 Kg

For use with BMG use the following step values
8 bit micro stepping: E-steps 415
16 bit micro stepping: E-steps 830
32 bit micro stepping: E-steps 1660

Additional information
Bondtech

Accessories

Related Products

, , , ,

Mosquito 12V fan

Highlights:
Mosquito 12V fan
  • High quality 25 mm box fan with Japanese bearings
  • 3.64 CFM
  • Genuine Molex Micro-Fit 3.0 connector
  • Mounts directly to Mosquito or Mosquito Magnum hotend with included hardware
  • Available in 12V or 24V configurations
  • 1 m extension cable included.

€7.53

Available on backorder

Add to cart
Quick View
, ,

3DSolex Matchless Everlast 1.75mm Nozzle

Highlights:
  • Compatible with E3D V6, Prusa, Raise3D N2 and many more

    Core Heating Technology

    This nozzle will fit a large number of printers and hot-ends.
    Drop-in compatibility to replace many other nozzles.

    Features

    • Uses Core Heating technology to increase the melt zone
    • Ruby tip to be abrasive resistant
    • 1 unit per pack
    • Available in sizes 0.4, 0.6 and 0.8 mm

    Advantages

    • Higher melt flow, up to 3 fold
    • Use lower temperatures in your print profiles, or
    • Work with thicker layers or/at higher speeds
    • Machined with precision
    • Hard tip to work with abrasive materials
€72.90

Available on backorder

Select options
Quick View
, ,

Bondtech Brass Nozzle M6×0.75×5×13 1.75

Highlights:

This nozzle is manufactured by Bondtech in-house,
and will fit the following 3D printers:

  • Creality CR-10 Max
  • Creality CR-10S Pro
  • Creality CR-10S Pro V2

Features

  • 1 unit per pack
  • Available in sizes from 0.25 to 0.8mm
€9.66

Available on backorder

Select options
Quick View
,

BMG Extruder

Highlights:

The Bondtech BMG extruder combines high performance and resolution with low weight. Together with our proven and highly celebrated Dual-Drive technology you can expect problem free material feeding.

The BMG works in both bowden and direct driven applications. Built in fitting for the E3D hotend and fits Nema17 stepper motors.

The housing parts are professionally SLS printed in nylon for maximum strength and precision.

This extruder only supports 1.75 mm size filament.

€85.95

Available on backorder

Select options
Quick View
,

BMG-M Extruder

Highlights:

The Bondtech BMG-M extruder combines high performance and resolution with low weight. Together with our proven and highly celebrated Dual-Drive technology you can expect problem free material feeding.

Designed for Mosquito

This extruder is optimized for the Mosquito / Mosquito Magnum hotends with and integrated torque lock system to make the interface very strong and makes nozzle changes a breeze.

Made with PA12 by SLS

The housing parts are professionally SLS printed in nylon for maximum strength and precision.

This extruder only supports 1.75 mm size filament.

€85.95

Available on backorder

Select options
Quick View
, , , ,

Mosquito 24V 50W heater

Highlights:

Mosquito 24V 50W heater

  • Cartridge length: 22 mm;
  • Cartridge diameter: sized to fit into a 6mm H7 tolerance hole.
  • Extension cable is 1m in length
  • Molex connectors
  • Available in 12V or 24V variations
  • 50W

€21.48

Available on backorder

Add to cart
Quick View
, ,

3DSolex Nozzle for Raise3D PRO2

Highlights:
This nozzle will fit the Raise3D Pro2 only.

Features

  • Works with all non-technical filaments
  • Use with all the original print profiles
  • 1 unit per pack
  • Available in the following sizes: 0.25; 0.40; and 0.80 mm

Advantages

    • Perfect fit
    • Machined with precision
€18.54

Available on backorder

Select options
Quick View
, ,

Bondtech Coated Nozzle M6×1×7.5×12.5 1.75

Highlights:

This nozzle is manufactured by Bondtech in-house,
and will fit the following hotends/blocks:

  • Mosquito and Mosquito Magnum
  • Copperhead
  • E3D V4, V5 and V6 blocks
  • E3D Chimera and Kraken
  • RepRap M6

Features

  • 1 unit per pack
  • Available in sizes from 0.25 to 0.8mm
€16.10

Available on backorder

Select options
Quick View
,

BMG-X2 Extruder

Highlights:
BMG-X2 Extruder

The Bondtech BMG-X2 is the best and lightest performing extruder on the market that combines low weight with double high feeding capacity.

Two Versions Available
  • for the older type of Chimera/Cyclops with a c-c of 18.00 mm (see pictures with Alu Mounts);
  • for the newer Chimera+/Cyclops+ with a c-c of 20.00 mm (see pictures with red tabs).

The CC 20.00 version is compatible with the Aqua Version.
Make sure to select the correct version for your application.

This extruder only supports 1.75 mm size filament.

€145.04

Available on backorder

Select options
Quick View
, ,

3DSolex Matchless 2.85mm nozzle

Highlights:

  • Core Heating Technology

    This nozzle will fit a large number of printers and hot-ends.
    Drop-in compatibility to replace many other nozzles.

    Features

    • Uses Core Heating technology to increase the melt zone
    • Longer threading to increase heat transfer
    • 1 unit per pack
    • Available in sizes from 0.25 to 2.0mm

    Advantages

    • Higher melt flow, up to 3 fold
    • Use lower temperatures in your print profiles, or
    • Work with thicker layers or/at higher speeds
    • Machined with precision
€14.83

Available on backorder

Select options
Quick View
, ,

3DSolex Hardcore ICE Nozzle

Highlights:
This nozzle will ONLY fit the 3DSolex Hardcore.
Hardcore fits in UM3, UM3 Extended, UM S3 and UM S5.

Features

  • Core Heating Technology to increase the melt capacity
  • 1 unit per pack
  • Available in sizes from 0.1 to 1.0 mm

Advantages

    • Higher melt flow, up to 3 fold
    • Use lower temperatures in your print profiles
    • Work with thicker layers or at higher speeds
    • Machined with precision
€24.71

Available on backorder

Select options
Quick View
, ,

Bondtech Brass Nozzle M6×1×7.5×12.5 1.75

Highlights:

This nozzle is manufactured by Bondtech in-house,
and will fit the following hotends/blocks:

  • Mosquito and Mosquito Magnum
  • Copperhead
  • E3D V4, V5 and V6 blocks
  • E3D Chimera and Kraken
  • RepRap M6

Features

  • 1 unit per pack
  • Available in sizes from 0.25 to 0.8mm
€9.66

Available on backorder

Select options
Quick View
Scroll To Top
Close
Close
Veikals
0 Grozs
Close

My Cart

Shopping cart is empty!

Continue Shopping