Mosquito 24V fan
€7.53
Mosquito 12V fan
- High quality 25 mm box fan with Japanese bearings
- 3.64 CFM
- Genuine Molex Micro-Fit 3.0 connector
- Mounts directly to Mosquito or Mosquito Magnum hotend with included hardware
- Available in 12V or 24V configurations
- 1 m extension cable included.
Available on backorder
Related products
Nema17 Pancake stepper 22mm
Nema17 Pancake stepper 22mm
Nema17 Pancake stepper with a 150 mm long not detachable stripped cable with connector.
3DSolex Matchless 1.75mm nozzle
- Compatible with E3D V6, Prusa, Raise3D N2 and many more
Core Heating Technology
This nozzle will fit a large number of printers and hot-ends.
Drop-in compatibility to replace many other nozzles.Features
- Uses Core Heating technology to increase the melt zone
- 1 unit per pack
- Available in sizes from 0.25 to 2.0mm
Advantages
- Higher melt flow, up to 3 fold
- Use lower temperatures in your print profiles, or
- Work with thicker layers or/at higher speeds
- Machined with precision
Nema17 Geared stepper
Nema17 geared stepper with a planetary gear reducer.
Delivered with a 700 mm long JST-XH6 to PC2510 cable with quick-fit connectors.
For best performance it should be driven with 24V, please adjust your stepperdriver to output max 1.2A.
Additional cables also available, see to the right.
For common ratings, specifications and dimensions please see below or in the datasheet.
Bondtech Coated Nozzle M6×0.75×5×13 1.75
This nozzle is manufactured by Bondtech in-house,
and will fit the following 3D printers:
- Creality CR-10 Max
- Creality CR-10S Pro
- Creality CR-10S Pro V2
Features
- 1 unit per pack
- Available in sizes from 0.25 to 0.8mm
V2 Extruder
The Bondtech Extruder Universal is based on our revolutionary new DualDrive technology that gives the best performance that are available today on the market.
The V2 designs is our first released product that allows for both a Bowden and a Direct-drive setup according to your choice. The unit is ready for Direct Drive use, for Bowden use you need the additional Bowden adapter.
QR Extruder
Dual Drive Gear Performance
The Bondtech QR Universal extruder gives you the markets highest performance, precision and reliability. Together with our proven and highly celebrated Dual-Drive technology you can expect problem free material feeding.
Universal Fit
The QR extruder is a universal solution which fits both bowden and direct driven applications. Available in both standard (right handed) and mirrored (left handed) orientation, for 3.00/2.85 and 1.75 mm filament.
Mosquito 12V fan
Mosquito 12V fan
- High quality 25 mm box fan with Japanese bearings
- 3.64 CFM
- Genuine Molex Micro-Fit 3.0 connector
- Mounts directly to Mosquito or Mosquito Magnum hotend with included hardware
- Available in 12V or 24V configurations
- 1 m extension cable included.
BMG-X2-M Extruder For Mosquito
The Bondtech BMG-X2 is the best and lightest performing extruder on the market that combines low weight with dual high feeding capacity.
Dedicated For Mosquito Hotends
This extruder is available in a single version, to use Mosquito hotends. The same version is also compatible with Mosquito Magnum.
Both have a C-C distance of 15mm.
Mosquito Boron Nitride Paste
Mosquito Boron Nitride Paste
- Thermal paste for improving conduction
- Acts as a release agent
- Use the included applicator to coat the cartridge heater hole in your 3d printer heat block. Insert the cartridge heater while the paste is still wet, then let dry. The boron nitride boosts dissipation of heat from the hot section of the cartridge heater, improving its life.
- Retails in 5 cc syringes with luer lock fittings.
Bondtech Brass Nozzle M6×0.75×5×13 1.75
This nozzle is manufactured by Bondtech in-house,
and will fit the following 3D printers:
- Creality CR-10 Max
- Creality CR-10S Pro
- Creality CR-10S Pro V2
Features
- 1 unit per pack
- Available in sizes from 0.25 to 0.8mm
Nema17 Pancake stepper 25mm
Nema17 Pancake stepper 25mm
Nema17 High resolution 1.8 degree pancake stepper motor.
Delivers with a 300 mm JST-XH6 cable stripped without a second connector.
For common ratings, specifications and dimensions please see below or in the datasheet.
3DSolex Matchless Everlast 2.85mm Nozzle
-
Compatible with UM2+, UM2 Extended+, Olsson Block, E3D V6
Core Heating Technology
This nozzle will fit a large number of printers and hot-ends.
Drop-in compatibility to replace many other nozzles.Features
- Uses Core Heating technology to increase the melt zone
- Ruby tip to be abrasive resistant
- 1 unit per pack
- Available in sizes from 0.25 to 1.2 mm
Advantages
- Higher melt flow, up to 3 fold
- Use lower temperatures in your print profiles, or
- Work with thicker layers or/at higher speeds
- Machined with precision
- Hard tip to work with abrasive materials