Nozzle: 215 – 230 °C
Printbed: 0 – 60 °C
Speed: Medium
Fan: On
Formfutura Matt PLA (polylactic acid) is modified to have a rough and matt surface finish. Matt PLA has excellent 3D printing properties and combines a distinguished surface quality with fine details reinforced by its matt appearance.
Key features
- Good surface quality
-
- Rough and matt surface finish with fine detail
- Easy to print at high printing speeds
-
- Warp-free printing and improved flowing behaviour
- Excellent first layer adhesion to several (un)heated print surfaces
- Compatible with AquaSolve PVA
- Wide variety of matt PLA colours
Applications
- Household tools
- Architectural mock-ups
- Complex educational projects and models
- Concept models
- Manufacturing and visualization aids
Abbrassiveness
Matt PLA is modified with fillers that can have an abrasive effect on brass nozzles. We recommend to use hardened steel nozzles when 3D printing with Matt PLA.
General printing guidelines *
| Nozzle size: ≥ 0.15mm | Layer height: ≥ 0.10mm | Experience level: Beginner |
| Print temp: ± 215 – 230° C | Fan speed: 50-100% | |
| Heat bed: ± 0 – 60° C | Enclosure needed: No |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.
