Nozzle: 215 – 245 °C
Printbed: ± 60 °C
Speed: 50-100%
Fan: On
Unique features
- Extremely high gloss
- High level of light dispersion and reflection
- Wide variety of deep brilliant colors
- 3D prints with almost no visible layers
- Very smooth and silky surface finish
- Compatible with AquaSolve PVA for complex dual extrusion 3D printing
Applications
- Aesthetics, design, and art
- Complex educational projects and models
- Household articles
- Visualization aids
General printing guidelines *
| Nozzle size: ≥ 0.15mm | Layer height: ≥ 0.1mm | Experience level: Beginner |
| Print temp: ± 215 – 245° C * | Fan speed: 50-100% |
Buildplate adhesion: EasyFix Nr. I |
| Heat bed: ± 60° C | Enclosure needed: No |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different types of printers, hot-ends, and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.
*) If you use a vanadium steel / hardened steel and/or tungsten carbide nozzle then please raise the printing temperature up to 240 – 245° C to maintain the high gloss. If you still have trouble losing the shine, you can drop the part cooling fan to 50% or lower. For brass and copper nozzles you can print at215 – 225° C. Please do feel free to experiment with these settings.
Filament length
| ρ: 1.24 g/cc | 50 gr coil | 0.75 Kg spool | 2.3 Kg spool | 4.5 Kg spool | 8 Kg spool |
| Ø 1.75mm | ± 16.8m | ± 251m | ± 771m | ± 1509m | ± 2682m |
| Ø 2.85mm | ± 6.3m | ± 95m | ± 291m | ± 569m | ± 1011m |
