Nozzle: 220 – 260 °C
Printbed: 90 – 100 °C
Speed: Medium
Fan: On
EasyFil HIPS was formerly known as LimoSolve HIPS.
EasyFil HIPS is a high-performance and easy to print High Impact PolyStyrene type of 3D printer filament which doesn’t contain any added colorants and dissolves completely in Limonene. Being soluble in Limonene in combination with similar thermal properties to ABS make LimoSolve an outstanding supporting material for complex dual extrusion ABS prints.
When not being used as support material EasyFil HIPS prints in an extremely bright white colour.
Unique features
- Good support material for dual extrusion ABS prints
-
- Similar thermal and printing properties to ABS
- Soluble in Limonene
- Very limited warping
- High impact resistance
- Extremely smooth, bright white and matte surface finish
- Light-weight and durable
General printing guidelines *
| Nozzle size: ≥ 0.15mm | Layer height: ≥ 0.1mm | Flow rate: ± 104% |
| Print temp: ± 220 – 260° C | Print speed: Medium | Retraction: Yes ± 5mm |
| Heat bed: ± 90 – 110° C | Fan speed: 20-50% | Experience level: Intermediate |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
