Wavelength: 385 – 420 nm
EasyClean resin cleaner is chemically engineered to safely and effectively remove any uncured photopolymer 3D printing resin in the range of 385 – 420nm from SLA, DLP, or LCD 3D printed objects. EasyClean is made from organic solvents and is safer and more effective than Isopropyl Alcohol (IPA) and can be used roughly 3 times longer than IPA.
Key features
- Superb cleaning properties
-
- Breaks down resin better than IPA and other solutions
- Doesn’t leave any residue, cloudiness, or white haze
- No sticky prints
- Compatible with all UV curable resins for SLA, DLP, and LCD 3D printing technologies
- Compatible for cleaning with magnetic stirrers, ultrasonic cleaners, and washing/curing stations
- No transport restrictions
-
- Not classified as a dangerous good by ADR and IATA
- Non-flammable
- Limited odor
- Can also be used for cleaning build plates, vats, and other surfaces that come in contact with resins
- Long shelflife up to 24 months
How to use
- Put the resin print in a tub filled with EasyClean resin cleaner
- Clean for 10-15 minutes when cleaning by hand, or 5 minutes when using an ultrasonic cleaner
- After cleaning let the printed object dry or rinse with tap water
Storage
Store EasyClean in a well-ventilated area in its original HDPE bottle, or jerrycan. Make sure the bottle or jerrycan is tightly closed and stored at a temperature below 25°C. When stored properly EasyClean Resin Cleaner has a shelflife up to 24 months.
Physical properties
| Description | Test method |
Value |
| Flashpoint | ASTM D 3828 | 75°C (1013hPa) |
| Boiling point | 189,6°C (1013hPa) | |
| Self-ignition temperature | 207°C (1013 hPa) | |
| Density at 23°C | MVPF 18 | 0,9539 g/cm3 (20 °C) |
Product export information
| HS Code: 29094980 | Description: Resin cleaning solution | EU preferential origin |
