-
Stock nozzles will not fit this hot block. You need to upgrade the nozzles to the RepRap standard : M6x1x7.5×12.5
This DDX set is the right configuration to upgrade the stock hotend to PHase 3, with an original Mosquito™ hotend on any Creality using the Bondtech DDX Direct Drive eXtruder.
High Quality Components
Product is supplied with a Bi-metallic structure reinforced Mosquito™ Magnum hotend, a PA6 Laser Sintered DDX Adapter for Mosquito™, and a Brass Thermistor Adapter.
Hotend by
How To Change Nozzles
When changing nozzles with this hotend there is no need to immobilise the hot block before twisting the nozzle. You can screw in, or unscrew, the nozzles without holding the hot block steady, when using the recommended Torque Wrench.
DDX PH3 Mosquito™ Magnum Upgrade
€196.61
Highlights:
DDX PH3 Mosquito™ Magnum Upgrade
Upgrade your Creality hotend and DDX Direct Drive eXtruder with a full genuine Mosquito™ hotend to PHase 3.Turn your Creality hotend into an all-metal.Stop the issues created by the PTFE deformation when using temperatures above 220° C.Improve the heat dissipation capacity and melt flow.
Use even shorter retractions.
Available on backorder
Description
Additional information
| Bondtech | Upgrade |
|---|
Compatibility table
Compatibility table
| DDX PH3 UPGRADE KITS | COMPATIBLE WITH |
|---|---|
| PH2 to PH3 Copperhead Upgrade | Creality units upgraded with DDX PH2 |
| DDX PH3 Copperhead Upgrade | All Creality units upgraded with DDX |
| DDX PH3 Mosquito Upgrade | All Creality units upgraded with DDX |
| DDX PH3 Mosquito Upgrade | All Creality units upgraded with DDX |
Related Products
Mosquito Boron Nitride Paste
Highlights:
Mosquito Boron Nitride Paste
- Thermal paste for improving conduction
- Acts as a release agent
- Use the included applicator to coat the cartridge heater hole in your 3d printer heat block. Insert the cartridge heater while the paste is still wet, then let dry. The boron nitride boosts dissipation of heat from the hot section of the cartridge heater, improving its life.
- Retails in 5 cc syringes with luer lock fittings.