DDX PH3 Copperhead™ Upgrade

121.39 109.25

DDX PH3 Copperhead™ Upgrade your Creality and DDX Direct Drive eXtruder with a full genuine Copperhead™ hotend to PHase 3.

Turn your Creality hotend into an all-metal.
Stop the issues created by the PTFE deformation when using temperatures above 220° C.Improve the heat dissipation capacity.Use retractions as short as the nozzle diameter.

Stock nozzles will not fit this hot block. You need to upgrade the nozzles to the RepRap standard : M6x1x7.5×12.5

Available on backorder

  • This DDX set is the right configuration to upgrade the stock hotend to PHase 3, with a full and original Copperhead™ hotend on any Creality using the Bondtech DDX Direct Drive eXtruder.

    High Quality Components

    Product is supplied with a Aluminum Screw Mount Heat Sink, a W2S (Tungsten Disulfide) plated Stainless Steel and Copper Standard Heat break, a Nickel plated Copper Hot Block, a PA6 Laser Sintered DDX Adapter for Copperhead™, and a Brass Thermistor Adapter.

    Heat Sink, Heat Break and Hot Block by
    sliceEngineeringLogo Stacked Master GrayText

    How To Change Nozzles

    When changing nozzles with this hotend immobilise the hot block before twisting the nozzle. Forcing the nozzle to screw in, or to unscrew, without holding the hot block steady, may cause severe damage to the heat break.

Compatibility table

Compatibility table

PH2 to PH3 Copperhead Upgrade Creality units upgraded with DDX PH2
DDX PH3 Copperhead Upgrade All Creality units upgraded with DDX
DDX PH3 Mosquito Upgrade All Creality units upgraded with DDX
DDX PH3 Mosquito Upgrade All Creality units upgraded with DDX
Scroll To Top

My Shopping cart


No products in the cart.

Shopping Now

Login & Signup