Nozzle: 255 – 270 °C
Printbed: 90 – 110 °C
Speed: 20 – 45 mm/s
Fan: Off
Properties:
- high UV resistance
- high durability
- lasting colours
- resistance to temperatures up to 94°C
- possibility of finished model machining
- low odour emission compared to ABS
How to print?
The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.
| Nozzle Temperature | 255-270°C |
| Bed Temperature | 90-110°C |
| Closed chamber | not required |
| Fan | 0-25% |
| Flowrate | 90-100% |
| Printing Speed | < 100 mm/s |
| Surface | glass, kapton tape, ABS juice |
| Retraction (direct) | yes, 1-2 mm |
| Retraction (bowden) | yes, 4-6 mm |
| Retraction Speed | 20-45 mm/s |
| Notes | When printing without a heated chamber, it is recommended to avoid exposing the model to gusts of wind/drafts |
| DIAMETER | DIAMETER TOL | OVAL TOL | PRINTING TEMP | TABLE TEMP |
|---|---|---|---|---|
| 1.75 mm | +/- 0.02 mm | + 0.01 mm | 255-270°C | 90-110°C |
