Compatibility
This nozzle is compatible with the following hot-ends:
3DSolex Hardcore AA
3SSolex Hardcore PVA-BB
for Ultimaker 3
for Ultimaker 3 Extended
for Ultimaker S3
for Ultimaker S5
This nozzle has a M6x0.75 threading and 11mm in length.
Core Heating Technology Explained
Existing hot-ends and nozzles melt the filament from the outside in. The coldest part of the filament, at the core, is the one being pushed and reaching the tip of the nozzle faster.
With Core Heating Technology we melt the interior of the filament first. Compared with standard nozzles, this brings the following advantages:
- less temperature is required to successfully process the material
- print with much bigger nozzles, up to 2.0 mm
- print with higher layers and/or faster speeds
 |
 |
| The 0.25mm nozzles in this product line are not enabled with Core Heating technology . | |
We recommend you to have several sets of nozzles because:Different nozzle sets for different materials
Using different materials with the same nozzles causes deposit build-up inside the nozzle.
These deposits will cause blockages.
We recommend changing nozzles when changing materials.
