Direct Drive eXtruder

Direct Drive eXtruder

Showing all 6 results

Show:

DDX PH2 to PH3 Copperhead™ Upgrade

Highlights:

Upgrade your Copperhead™ Phase 2 hot end into a full Copperhead™ Phase 3.

Improve the heat dissipation capacity.

DDX PH3 Copperhead™ Upgrade

Highlights:

DDX PH3 Copperhead™ Upgrade your Creality and DDX Direct Drive eXtruder with a full genuine Copperhead™ hotend to PHase 3.

Turn your Creality hotend into an all-metal.

Stop the issues created by the PTFE deformation when using temperatures above 220° C.Improve the heat dissipation capacity.Use retractions as short as the nozzle diameter.

Stock nozzles will not fit this hot block. You need to upgrade the nozzles to the RepRap standard : M6x1x7.5×12.5

DDX PH3 Mosquito™ Upgrade

Highlights:

DDX PH3 Mosquito™ Upgrade

Upgrade your Creality hotend and DDX Direct Drive eXtruder with a full genuine Mosquito™ hotend to PHase 3.

Turn your Creality hotend into an all-metal.

Stop the issues created by the PTFE deformation when using temperatures above 220° C.

Improve the heat dissipation capacity and melt flow.

Use even shorter retractions.

DDX PH3 Mosquito™ Magnum Upgrade

Highlights:

DDX PH3 Mosquito™ Magnum Upgrade

Upgrade your Creality hotend and DDX Direct Drive eXtruder with a full genuine Mosquito™ hotend to PHase 3.Turn your Creality hotend into an all-metal.Stop the issues created by the PTFE deformation when using temperatures above 220° C.Improve the heat dissipation capacity and melt flow.
Use even shorter retractions.

Bondtech DDX For Creality CR-10(S)Pro/Max

Highlights:

Bondtech DDX For Creality CR-10(S)Pro/MaxThe Bondtech DDX Direct Drive eXtruder for Creality 3D printers is an upgrade kit that replaces the original bowden with a direct drive setup. It is a high-performance Dual Drive extruder based on the BMG Bondtech Mini Geared.Compatible with the following models:

  • CR-10S Pro;
  • CR-10S Pro v2;
  • CR-10 Max*1;

Multiple Hotends Compatibility

This model was created to be compatible with the original hotend of each Creality model. Users may also upgrade the hotend to Copperhead™ or Mosquito™.

Bondtech DDX For Creality Ender/CR-10(S)

Highlights:

The Bondtech DDX Direct Drive eXtruder for Creality 3D printers is an upgrade kit that replaces the original bowden with a direct drive setup. It is a high-performance Dual Drive extruder based on the BMG Bondtech Mini Geared.

Compatible with the following models:

  • Ender-3;
  • Ender-3 Pro;
  • Ender-5;
  • Ender-5 Pro;
  • Ender-5 Plus*1;
  • CR-10 (Mini);
  • CR-10S;
  • CR-10 S4;
  • CR-10 S5.

Multiple Hotends Compatibility

This model was created to be compatible with the original hotend of each Creality model. Users may also upgrade the hotend to Copperhead™ or Mosquito™.

Scroll To Top
Close
Close
Veikals
Filtrs
0 Grozs
Close

My Cart

Shopping cart is empty!

Continue Shopping