Direct Drive eXtruder

Direct Drive eXtruder

Showing all 6 results

Show:

Bondtech DDX For Creality CR-10(S)Pro/Max

Highlights:
Bondtech DDX For Creality CR-10(S)Pro/MaxThe Bondtech DDX Direct Drive eXtruder for Creality 3D printers is an upgrade kit that replaces the original bowden with a direct drive setup. It is a high-performance Dual Drive extruder based on the BMG Bondtech Mini Geared.Compatible with the following models:

  • CR-10S Pro;
  • CR-10S Pro v2;
  • CR-10 Max*1;

Multiple Hotends Compatibility

This model was created to be compatible with the original hotend of each Creality model. Users may also upgrade the hotend to Copperhead™ or Mosquito™.
159.00 143.10

Available on backorder

Bondtech DDX For Creality Ender/CR-10(S)

Highlights:

The Bondtech DDX Direct Drive eXtruder for Creality 3D printers is an upgrade kit that replaces the original bowden with a direct drive setup. It is a high-performance Dual Drive extruder based on the BMG Bondtech Mini Geared.

Compatible with the following models:

  • Ender-3;
  • Ender-3 Pro;
  • Ender-5;
  • Ender-5 Pro;
  • Ender-5 Plus*1;
  • CR-10 (Mini);
  • CR-10S;
  • CR-10 S4;
  • CR-10 S5.

Multiple Hotends Compatibility

This model was created to be compatible with the original hotend of each Creality model. Users may also upgrade the hotend to Copperhead™ or Mosquito™.

159.00 143.10

Available on backorder

DDX PH2 to PH3 Copperhead™ Upgrade

Highlights:

Upgrade your Copperhead™ Phase 2 hot end into a full Copperhead™ Phase 3.

Improve the heat dissipation capacity.

90.25 81.22

Available on backorder

DDX PH3 Copperhead™ Upgrade

Highlights:
DDX PH3 Copperhead™ Upgrade your Creality and DDX Direct Drive eXtruder with a full genuine Copperhead™ hotend to PHase 3.

Turn your Creality hotend into an all-metal.
Stop the issues created by the PTFE deformation when using temperatures above 220° C.Improve the heat dissipation capacity.Use retractions as short as the nozzle diameter.

Stock nozzles will not fit this hot block. You need to upgrade the nozzles to the RepRap standard : M6x1x7.5×12.5

121.39 109.25

Available on backorder

DDX PH3 Mosquito™ Magnum Upgrade

Highlights:

DDX PH3 Mosquito™ Magnum Upgrade

Upgrade your Creality hotend and DDX Direct Drive eXtruder with a full genuine Mosquito™ hotend to PHase 3.Turn your Creality hotend into an all-metal.Stop the issues created by the PTFE deformation when using temperatures above 220° C.Improve the heat dissipation capacity and melt flow.
Use even shorter retractions.
196.61 176.95

Available on backorder

DDX PH3 Mosquito™ Upgrade

Highlights:

DDX PH3 Mosquito™ Upgrade

Upgrade your Creality hotend and DDX Direct Drive eXtruder with a full genuine Mosquito™ hotend to PHase 3.

Turn your Creality hotend into an all-metal.

Stop the issues created by the PTFE deformation when using temperatures above 220° C.

Improve the heat dissipation capacity and melt flow.

Use even shorter retractions.

175.12 157.61

Available on backorder

Scroll To Top

My Shopping cart

Close

No products in the cart.

Shopping Now

Login & Signup