Creality3D

Creality3D

Showing all 10 results

Show:

DDX PH2 to PH3 Copperhead™ Upgrade

Highlights:

Upgrade your Copperhead™ Phase 2 hot end into a full Copperhead™ Phase 3.

Improve the heat dissipation capacity.

90.25

Available on backorder

DDX PH3 Copperhead™ Upgrade

Highlights:

DDX PH3 Copperhead™ Upgrade your Creality and DDX Direct Drive eXtruder with a full genuine Copperhead™ hotend to PHase 3.

Turn your Creality hotend into an all-metal.

Stop the issues created by the PTFE deformation when using temperatures above 220° C.Improve the heat dissipation capacity.Use retractions as short as the nozzle diameter.

Stock nozzles will not fit this hot block. You need to upgrade the nozzles to the RepRap standard : M6x1x7.5×12.5

121.39

Available on backorder

DDX PH3 Mosquito™ Upgrade

Highlights:

DDX PH3 Mosquito™ Upgrade

Upgrade your Creality hotend and DDX Direct Drive eXtruder with a full genuine Mosquito™ hotend to PHase 3.

Turn your Creality hotend into an all-metal.

Stop the issues created by the PTFE deformation when using temperatures above 220° C.

Improve the heat dissipation capacity and melt flow.

Use even shorter retractions.

175.12

Available on backorder

DDX PH3 Mosquito™ Magnum Upgrade

Highlights:

DDX PH3 Mosquito™ Magnum Upgrade

Upgrade your Creality hotend and DDX Direct Drive eXtruder with a full genuine Mosquito™ hotend to PHase 3.Turn your Creality hotend into an all-metal.Stop the issues created by the PTFE deformation when using temperatures above 220° C.Improve the heat dissipation capacity and melt flow.
Use even shorter retractions.
196.61

Available on backorder

Creality3D CR-10S PRO Extruder Kit

Highlights:

Creality3D CR-10S PRO Extruder Kit

Updated Version

Now this upgrade is supplied with the newest version of the Bondtech Mini Geared (BMG) extruder, featuring brass motor gear, black POM main gear, and threaded push-fit.

The BMG Bowden Upgrade Kit for the CR-10S Pro uses Bondtech Dual Drive Gears to give extra push force and resolution plus a tighter fit between gears and housing to avoid filament jamming.

This kit is adapted for the Creality CR-10S PRO 3D-printer.

96.69

Available on backorder

Bondtech DDX For Creality CR-10(S)Pro/Max

Highlights:

Bondtech DDX For Creality CR-10(S)Pro/MaxThe Bondtech DDX Direct Drive eXtruder for Creality 3D printers is an upgrade kit that replaces the original bowden with a direct drive setup. It is a high-performance Dual Drive extruder based on the BMG Bondtech Mini Geared.Compatible with the following models:

  • CR-10S Pro;
  • CR-10S Pro v2;
  • CR-10 Max*1;

Multiple Hotends Compatibility

This model was created to be compatible with the original hotend of each Creality model. Users may also upgrade the hotend to Copperhead™ or Mosquito™.
159.00

Available on backorder

Creality3D CR-10S Kit

Highlights:

Creality3D CR-10S Kit

Updated Version

Now this upgrade is supplied with the newest version of the Bondtech Mini Geared (BMG) extruder, featuring brass motor gear, black POM main gear, and threaded push-fit.

Improved Performance

This kit includes the BMG (Bondtech Mini Geared) Extruder, a high-performance material feeding system with the ability to print faster and with improved quality. The adjustable thumbscrew allows you to fine-tune the force acting on the filament.The housing parts are professionally SLS printed in polyamide for maximum strength and precision.

This kit fits the Creality3D CR-10S, CR-10 S4, and CR-10 S5.

96.69

Available on backorder

Creality3D CR-10 V2 Extruder Kit

Highlights:

Creality3D CR-10 V2 Extruder Kit

Updated Version

This upgrade is supplied with the newest version of the Bondtech Mini Geared (BMG) extruder, featuring brass motor gear, black POM main gear, and threaded push-fit.

Increase Your Printer’s Value

The Creality CR-10 V2 Extruder Kit uses Bondtech Dual Drive Gears to give extra push force and resolution plus a tighter fit between gears and housing to avoid filament jamming.

This kit is adapted for the Creality CR-10 V2 3D-printer.

96.69

Available on backorder

Creality3D CR-10/Ender3 Upgrade Kit

Highlights:

Upgrade Kit For Multiple Models

  • Creality CR-10;
  • Creality CR-10S;
  • Creality Ender3;
  • Tevo Tornado;
  • Other similar models.

Updated Version

Now this upgrade is supplied with the newest version of the Bondtech Mini Geared (BMG) extruder, featuring brass motor gear, black POM main gear, and threaded push-fit.

91.33

Available on backorder

Bondtech DDX For Creality Ender/CR-10(S)

Highlights:

The Bondtech DDX Direct Drive eXtruder for Creality 3D printers is an upgrade kit that replaces the original bowden with a direct drive setup. It is a high-performance Dual Drive extruder based on the BMG Bondtech Mini Geared.

Compatible with the following models:

  • Ender-3;
  • Ender-3 Pro;
  • Ender-5;
  • Ender-5 Pro;
  • Ender-5 Plus*1;
  • CR-10 (Mini);
  • CR-10S;
  • CR-10 S4;
  • CR-10 S5.

Multiple Hotends Compatibility

This model was created to be compatible with the original hotend of each Creality model. Users may also upgrade the hotend to Copperhead™ or Mosquito™.

159.00

Available on backorder

Scroll To Top
Close
Close
Veikals
Filtrs
0 Grozs
Close

My Cart

Shopping cart is empty!

Continue Shopping