Copperhead™ Hot Block
Copperhead™ Hot Block
This Hot Block is a part of the new flexible assembly
Copperhead™ Hotend from Slice Engineering
Materials Technology
This Copperhead™ Hot Block is made of a Nickel-plated Copper Alloy
Rated up to 450 °C
Copperhead™ MK10 Heat Break
Copperhead™ MK10 Heat Break
This Heat Block is a part of the new flexible assembly
Copperhead™ Hotend from Slice Engineering
Materials Technology
This Bimetallic Copperhead™ Heat Break is made with:
- Stainless Steel
- Copper alloy
Rated up to 450 °C
Copperhead™ MK8 Heat Break
Copperhead™ MK8 Heat Break
This Heat Block is a part of the new flexible assembly
Copperhead™ Hotend from Slice Engineering
Materials Technology
This Bimetallic Copperhead™ Heat Break is made with:
- Stainless Steel
- Copper alloy
Rated up to 450 °C
Copperhead™ RepRap 1.75 Heat Break
Copperhead™ RepRap 1.75 Heat Break
This Heat Block is a part of the new flexible assembly
Copperhead™ Hotend from Slice Engineering
Materials Technology
This Bimetallic Copperhead™ Heat Break is made with:
- Stainless Steel
- Copper alloy
Rated up to 450 °C
Copperhead™ Standard Heat Break
Copperhead™ Standard Heat Break
This Heat Block is a part of the new flexible assembly
Copperhead™ Hotend from Slice Engineering
Materials Technology
This Bimetallic Copperhead™ Heat Break is made with:
- Stainless Steel
- Copper alloy
Rated up to 450 °C
DDS Extension Cable 40cm
DDS Extension Cable 40cm
DDS Extension Cable
This extension cable will allow you to use our Direct Drive System for Creality3D CR-10S on the S4 and S5 models. It will extend the existing cables an extra 40 cm.
Now includes a 65cm PTFE tube
Mosquito 12V 50W heater
Mosquito 24V 50W heater
- Cartridge length: 22 mm;
- Cartridge diameter: sized to fit into a 6mm H7 tolerance hole.
- Extension cable is 1m in length
- Molex connectors
- Available in 12V or 24V variations
- 50W
Mosquito 12V fan
Mosquito 12V fan
- High quality 25 mm box fan with Japanese bearings
- 3.64 CFM
- Genuine Molex Micro-Fit 3.0 connector
- Mounts directly to Mosquito or Mosquito Magnum hotend with included hardware
- Available in 12V or 24V configurations
- 1 m extension cable included.
Mosquito 24V 50W heater
Mosquito 24V 50W heater
- Cartridge length: 22 mm;
- Cartridge diameter: sized to fit into a 6mm H7 tolerance hole.
- Extension cable is 1m in length
- Molex connectors
- Available in 12V or 24V variations
- 50W
Mosquito 24V fan
Mosquito 12V fan
- High quality 25 mm box fan with Japanese bearings
- 3.64 CFM
- Genuine Molex Micro-Fit 3.0 connector
- Mounts directly to Mosquito or Mosquito Magnum hotend with included hardware
- Available in 12V or 24V configurations
- 1 m extension cable included.
Mosquito Boron Nitride Paste
Mosquito Boron Nitride Paste
- Thermal paste for improving conduction
- Acts as a release agent
- Use the included applicator to coat the cartridge heater hole in your 3d printer heat block. Insert the cartridge heater while the paste is still wet, then let dry. The boron nitride boosts dissipation of heat from the hot section of the cartridge heater, improving its life.
- Retails in 5 cc syringes with luer lock fittings.
Mosquito Thermistor
Mosquito Thermistor
- Eliminates the need for high temperature RTD’s or having two separate thermistors to maintain accuracy at both the low and high end of the temperature spectrum
- Capable of reading from room temperature up to 450°C
- 15 mm long. 3 mm diameter, the de facto standard for sleeved thermistors
- High quality Molex™ Micro Fit 3.0 connectors mean the thermistor is simple to install and simple to remove
This thermistor now includes the 1m Extension Cable
Created by: