3DSolex Hardcore AA print core
Buy One, Replace Many
The 3DSolex Hardcore allows nozzle change. A single Hardcore and a set of nozzles can replace several original print cores.
Main Features
- It is fully compatible with standard Print Core AA
- Nozzle can be changed
- Compatible only with Hardcore nozzles from 3DSolex
Advantages
- More freedom to set print profiles
- Micro, Ruby and Steel nozzles are available
- Save money if you need multi nozzle configuration
3DSolex Hardcore Everlast Nozzle
-
Core Heating Technology
This nozzle will ONLY fit the 3DSolex Hardcore.
Hardcore fits in UM3, UM3 Extended, UM S3 and UM S5.Features
- Uses Core Heating technology to increase the melt zone
- Ruby tip to be abrasive resistant
- 1 unit per pack
- Available in sizes from 0.25 to 1.2mm
Advantages
- Higher melt flow, up to 3 fold
- Use lower temperatures in your print profiles
- Work with thicker layers or at higher speeds
- Machined with precision
- Hard tip to work with abrasive materials
3DSolex Hardcore ICE Nozzle
This nozzle will ONLY fit the 3DSolex Hardcore.
Hardcore fits in UM3, UM3 Extended, UM S3 and UM S5.
Features
- Core Heating Technology to increase the melt capacity
- 1 unit per pack
- Available in sizes from 0.1 to 1.0 mm
Advantages
-
- Higher melt flow, up to 3 fold
- Use lower temperatures in your print profiles
- Work with thicker layers or at higher speeds
- Machined with precision
3DSolex Hardcore PVA BB print core
Buy One, Replace Many
The 3DSolex Hardcore allows nozzle change. If the nozzle gets stuck or wasted, just replace the nozzle.
Main Features
- It is fully compatible with standard Print Core BB
- Nozzle can be changed
- Compatible only with Hardcore nozzles from 3DSolex
Advantages
- More freedom to set print profiles
- Save money if you need just need new nozzle
3DSolex Matchless 1.75mm nozzle
- Compatible with E3D V6, Prusa, Raise3D N2 and many more
Core Heating Technology
This nozzle will fit a large number of printers and hot-ends.
Drop-in compatibility to replace many other nozzles.Features
- Uses Core Heating technology to increase the melt zone
- 1 unit per pack
- Available in sizes from 0.25 to 2.0mm
Advantages
- Higher melt flow, up to 3 fold
- Use lower temperatures in your print profiles, or
- Work with thicker layers or/at higher speeds
- Machined with precision
3DSolex Matchless 2.85mm nozzle
-
Core Heating Technology
This nozzle will fit a large number of printers and hot-ends.
Drop-in compatibility to replace many other nozzles.Features
- Uses Core Heating technology to increase the melt zone
- Longer threading to increase heat transfer
- 1 unit per pack
- Available in sizes from 0.25 to 2.0mm
Advantages
- Higher melt flow, up to 3 fold
- Use lower temperatures in your print profiles, or
- Work with thicker layers or/at higher speeds
- Machined with precision
3DSolex Matchless Everlast 1.75mm Nozzle
- Compatible with E3D V6, Prusa, Raise3D N2 and many more
Core Heating Technology
This nozzle will fit a large number of printers and hot-ends.
Drop-in compatibility to replace many other nozzles.Features
- Uses Core Heating technology to increase the melt zone
- Ruby tip to be abrasive resistant
- 1 unit per pack
- Available in sizes 0.4, 0.6 and 0.8 mm
Advantages
- Higher melt flow, up to 3 fold
- Use lower temperatures in your print profiles, or
- Work with thicker layers or/at higher speeds
- Machined with precision
- Hard tip to work with abrasive materials
3DSolex Matchless Everlast 2.85mm Nozzle
-
Compatible with UM2+, UM2 Extended+, Olsson Block, E3D V6
Core Heating Technology
This nozzle will fit a large number of printers and hot-ends.
Drop-in compatibility to replace many other nozzles.Features
- Uses Core Heating technology to increase the melt zone
- Ruby tip to be abrasive resistant
- 1 unit per pack
- Available in sizes from 0.25 to 1.2 mm
Advantages
- Higher melt flow, up to 3 fold
- Use lower temperatures in your print profiles, or
- Work with thicker layers or/at higher speeds
- Machined with precision
- Hard tip to work with abrasive materials
3DSolex Nozzle for Raise3D PRO2
This nozzle will fit the Raise3D Pro2 only.
Features
- Works with all non-technical filaments
- Use with all the original print profiles
- 1 unit per pack
- Available in the following sizes: 0.25; 0.40; and 0.80 mm
Advantages
-
- Perfect fit
- Machined with precision
BCN3D Sigma Kit
Bondtech upgrade kit for BCN3D SIGMA.
This kit provides a high-performance material feeding system with the ability to print faster with improved quality. The adjustable thumbscrew allows you to fine-tune the force acting on the filament.
The housing parts are professionally SLS printed in polyamide for maximum strength and precision.
This kit is developed by our partner Emvio Engineering from UK.
BMG Extruder
The Bondtech BMG extruder combines high performance and resolution with low weight. Together with our proven and highly celebrated Dual-Drive technology you can expect problem free material feeding.
The BMG works in both bowden and direct driven applications. Built in fitting for the E3D hotend and fits Nema17 stepper motors.
The housing parts are professionally SLS printed in nylon for maximum strength and precision.
This extruder only supports 1.75 mm size filament.
BMG-HT for Funmat HT
BMG-HT for Funmat HT
A High Temperature Extruder
The BMG-HT for the Intamsys Funmat HT is a high temperature upgrade kit based on our popular Bondtech Mini Geared (BMG) Extruder. It has a milled Aluminum housing, and a high temperature pancake stepper motor capable of withstanding build chamber temperatures up to 150℃.
For A High Temperature 3D printer
Increase the value of your Intamsys FunMat HT with this upgrade. Your 3D printer will be more reliable and less prone to slipping and grinding the filament. Avoid the common under extrusion issues by adding our state-of-the-art Dual Drive System to your high temperature 3D printer.