Bondtech

Bondtech

(Showing 1 – 12 products of 77 products)

Show:

Mosquito Boron Nitride Paste

Highlights:
Mosquito Boron Nitride Paste
  • Thermal paste for improving conduction
  • Acts as a release agent
  • Use the included applicator to coat the cartridge heater hole in your 3d printer heat block. Insert the cartridge heater while the paste is still wet, then let dry. The boron nitride boosts dissipation of heat from the hot section of the cartridge heater, improving its life.
  • Retails in 5 cc syringes with luer lock fittings.

10.74

1 in stock (can be backordered)

Nema 17 Motor Slim Power 0.9 degree

Highlights:

Nema 17 Motor Slim Power 0.9 degree

Nema 17 High resolution 0.9 degree pancake stepper motor. Perfect fit for our BMG / Prusa extruder upgrades.

Delivers with 1000 mm long cable with Dupont 4-pin connector to a JST-PH6 6-pin connector.

For common ratings, specifications and dimensions please see below or in the datasheet.

16.11

Available on backorder

Vanadium Nozzle

Highlights:
  • Lifetime warranty against abrasion
  • Wear resistant, plastic repellent coating
  • Made of Vanadium HSS, hardened and tempered to 64 Rockwell C.
  • Available in multiple orifice sizes
37.60

Available on backorder

Bondtech Brass Nozzle M6×1×5×13 1.75

Highlights:

This nozzle is manufactured by Bondtech in-house,
and will fit the following 3D printers:

  • bq Hephestos
  • Hephestos 2
  • bq Prusa i3 Hephestos
  • bq Witbox
  • bq Witbox 2
  • Creality CR-10
  • Creality CR-10-S4
  • Creality CR-10-S5
  • Creality CR-10S
  • MakerBot Replicator
  • MakerBot Replicator 2
  • MakerBot Replicator 2X
  • Creality Ender 2
  • Creality Ender 3 Pro
  • Creality CR-20 Pro
  • Creality Ender 5
  • Craftbot family
  • Creality CR-10 V2
  • Tevo Tornado

Features

  • 1 unit per pack
  • Available in sizes from 0.25 to 0.8mm
9.66

Available on backorder

Bondtech Coated Nozzle M6×1×7.5×12.5 1.75

Highlights:

This nozzle is manufactured by Bondtech in-house,
and will fit the following hotends/blocks:

  • Mosquito and Mosquito Magnum
  • Copperhead
  • E3D V4, V5 and V6 blocks
  • E3D Chimera and Kraken
  • RepRap M6

Features

  • 1 unit per pack
  • Available in sizes from 0.25 to 0.8mm
16.10

Available on backorder

BMG Extruder

Highlights:

The Bondtech BMG extruder combines high performance and resolution with low weight. Together with our proven and highly celebrated Dual-Drive technology you can expect problem free material feeding.

The BMG works in both bowden and direct driven applications. Built in fitting for the E3D hotend and fits Nema17 stepper motors.

The housing parts are professionally SLS printed in nylon for maximum strength and precision.

This extruder only supports 1.75 mm size filament.

85.95

Available on backorder

Bondtech Dual Drive Extrusion Upgrade Kit for Prusa Mini

Highlights:

Upgrade Kit for Prusa Mini

Bondtech high-resolution extruder upgrade for the Prusa Mini enabled with Dual Drive Technology.

Upgrade Your Prusa Mini

Upgrade your Prusa Mini with a Bondtech Dual Drive extruder designed to seamlessly fit the original setup.

Hardened Drive Gears

Allows to use abrasive materials that would wear out the gears of your original feeder otherwise.

Print Faster Or With Higher Quality

This bowden extruder will allow your 3D printer to print faster or to achieve even better surface quality.

69.84

Available on backorder

Prusa I3 MK2.5S / MK3S / MK3S+ Extruder upgrade

Highlights:

Prusa I3 MK2.5S / MK3S / MK3S+ Extruder upgrade

A lightweight high-resolution extruder upgrade for the popular Prusa I3 MK3S 3D printers, featuring an optimized design achieved with the help of the community.

This upgrade kit is compatible only with the original All Metal V6 hotend that is supplied with each Prusa.

Upgrade Your Extruder

Upgrade your extruder to a Bondtech Mini Geared with higher gear ratio – 3:1 – that allows for extra push force and higher resolution.

Print Faster Or With Higher Quality

Use a lightweight extruder that will allow your 3D printer to print faster or to achieve better surface quality.

Reduce 3D Printing Issues

Decrease the risk of heat creep to avoid clogs and improve filament feeding to avoid slipping and deformation that cause under and over extrusion issues.
For even more effective HotEnd cooling we recommend a fan with high pressure like Sunon’s MF40100V1-1000U-G99 or similar.

118.18

Available on backorder

Prusa i3 MK3S+/MK3S / MK2.5S Mosquito

Highlights:

Prusa i3 MK3S+/MK3S / MK2.5S Mosquito

A lightweight high-resolution extruder upgrade for the popular Prusa i3 MK3S and MK2.5S 3D printers with optimized design to use Mosquito and Mosquito Magnum hotends.

Upgrade Your Prusa

Upgrade your Prusa with a Bondtech Mini Geared extruder featuring higher gear ratio – 3:1 – that allows for extra push force and higher resolution.

Print Faster Or With Higher Quality

This lightweight extruder will allow your 3D printer to print faster or to achieve even better surface quality.

Reduce 3D Printing Issues

Decrease the risk of heat creep to avoid clogs and improve filament feeding by avoiding slipping and deformation that cause under and over extrusion issues.

121.40

Available on backorder

Bondtech LGX™ For Flexibles For Prusa i3 MK3S With Copperhead™

Highlights:

Bondtech LGX™ For Flexibles For Prusa MK3S


This is a LGX™ For Flexibles Special Setup to use on
Prusa MK3S and MK3S+.
It uses a Copperhead™ Hot Block and Copperhead™ LGX™ Heat Break from Slice Engineering.

Master All Materials * Excel With Flexibles


The LGX™ FF Print Head is a special unit that includes the LGX™ Large Gears eXtruder and the LGX™ FF short filament path hotend based on Copperhead, that will master all materials and excel with the soft and flexible.

276.11

Available on backorder

LGX™ Large Gears eXtruder

Highlights:

LGX™ Large Gears eXtruder

Each LGX™ extruder is supplied with:

  • 1x LGX™ feeder;
  • 1x Custom LDO Nema17 25mm pancake stepper motor;
  • 1x Bowden Interface Plug (with threaded metal push-fit);
  • 1x Direct Drive Interface Plug (for Slice Engineering hotends);
  • 1x 2mm Hex Key (recommended tool);
  • 1x Product Line Information Brochure;
  • 1x Powered By Bondtech sticker.

Now also shipping with additional accessories:

  • 3x M3x30 mm Low Head screws;
  • 4x M3x18 mm Stud with 5 Hex with M3x4 thread;
  • 30mm PTFE tube to use in the Direct Drive Interface Plug.

 

This extruder only supports 1.75 mm size filament.

106.36

Available on backorder

QR-M Extruder

Highlights:

QR-M Extruder

Push Force And Resolution

The Bondtech QR-M brings the same record level of torque and resolution as the Bondtech QR.

To Fit Mosquito Hotends

The QR-M extruder is the perfect match for big printers to fit Mosquito hotends on direct extruder applications. Compatible with:

  • Mosquito
  • Mosquito Magnum
  • Mosquito Liquid
  • Mosquito Magnum+
166.53

Available on backorder

Scroll To Top
Close
Close
Veikals
Filtrs
0 Grozs
Close

My Cart

Shopping cart is empty!

Continue Shopping